* feat(robots): natively integrate Seeed Studio reBot B601-DM arm
Add first-class LeRobot support for the Seeed Studio reBot arm, replacing
the out-of-tree `lerobot-robot-seeed-b601` / `lerobot-teleoperator-rebot-arm-102`
plugin packages.
New devices:
- robot `rebot_b601_follower` — single-arm B601-DM follower (6-DOF + gripper,
Damiao CAN motors via `motorbridge`)
- robot `bi_rebot_b601_follower` — bimanual follower composing two single arms
- teleoperator `rebot_102_leader` — single-arm StarArm102 / reBot Arm 102 leader
(FashionStar UART servos via `motorbridge-smart-servo`)
- teleoperator `bi_rebot_102_leader` — bimanual leader composing two single arms
The bimanual variants reuse the single-arm classes and namespace each arm's
observation/action keys with `left_` / `right_` prefixes, so a bimanual
StarArm102 leader can teleoperate a bimanual reBot B601 follower.
Optional SDK imports are guarded; a `rebot` extra installs `motorbridge` and
`motorbridge-smart-servo`.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* docs: add reBot B601-DM calibration & dual-arm teleoperation guide
Add docs/source/rebot_b601.mdx covering single-arm and bimanual
calibration and teleoperation for the reBot B601-DM follower and
reBot Arm 102 leader, with zero-position reference images from the
Seeed Studio wiki. Register the page in the docs toctree.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* docs: fix reBot B601 MDX build (move JSON example out of <Tip>)
The doc-builder parses `{...}` inside MDX component children as a
Svelte expression, so the joint_directions JSON example broke the
build. Move it into a top-level fenced code block.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* docs: apply prettier formatting to reBot B601 page
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* docs: remove duplicate colocated reBot B601 page
docs/source/rebot_b601.mdx is the canonical, toctree-registered page;
the colocated rebot_b601.md was a redundant thinner copy.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* docs: clarify 6-DOF leader fallback comment in reBot B601 follower
Explain that holding wrist_yaw at zero is what lets a 6-DOF leader
(e.g. so100_leader / so101_leader) teleoperate the 7-DOF follower.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* refactor: address Caroline's PR review on reBot B601 integration
- leader: remove _validate_config (no other lerobot device validates its
config; a key mismatch now surfaces as a plain KeyError)
- leader: simplify _round_to_valid_range to direct modular arithmetic
instead of a bidirectional search loop
- leader: inline the single-use _clamp helper
- follower & leader: write MotorCalibration range_min/range_max from the
configured joint_limits / joint_ranges instead of a fixed [-90, 90]
- docs: add a "Find the USB ports" section (lerobot-find-port) and move
the brltty/permissions tip there; link the OpenArm page for SocketCAN
adapter configuration
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* feat(cameras): add new read_latest() method
* fix(cameras): fix threading bug + clear state
* refactor(cameras): multiple improvements
* feat(camera): add context manager to camera base class
* chore(camera): slight modifications to opencv
* test(cameras): update opencv tests according to the changes
* refactor(cameras): reflect desing changes to realsense + deal with depth
* test(cameras): fix realsense tests accordingly to new changes
* refactor(cameras): update reachymini and zmq accordingly
* chore: wrap resource sensitive examples into a try/finally
* test(cameras): add test for new read_latest
* test(cameras): fix problem with image artifact in opencv tests
* test(cameras): fix test_read_latest_high_frequency expectations
* Apply suggestions from code review 1
Co-authored-by: Caroline Pascal <caroline8.pascal@gmail.com>
Signed-off-by: Steven Palma <imstevenpmwork@ieee.org>
* chore(cameras): address feedback
* feat(cameras): add max_age_ms check in read_latest
* test(cameras): fix read_latest tests
* chore(redundancies): removing redundancies in Reachy 2 camera class
* fix(warmup): replacing the arbitrary time.sleep in by an actual warmup in the RealSense camera class
* chore(format): formatting latest changes
* chore(warning): adding a "to be implemented" warning for read_latest() in Camera base class
* chore(warning): making read_latest() warning message shorter and clearer
---------
Signed-off-by: Steven Palma <imstevenpmwork@ieee.org>
Co-authored-by: Caroline Pascal <caroline8.pascal@gmail.com>
* fix(motors): cleanup imports + fix signatures
* feat(motors): add damiao canbus + multiple fixes
* fix(motors): address comments -> last_state + different gains + sleep
* refactor(motors): reduce duplicated code + adressed some comments in the PR
* chore(motors): better timeouts
* tests(motors): damiao test and imports
* chore(deps): fix space
* feat(robot): add openarm leader
Co-authored-by: Pepijn <pepijn@huggingface.co>
* feat(robot): add openarm follower
Co-authored-by: Pepijn <pepijn@huggingface.co>
* refactor(robot): remove mechanical compensations and double arm assumption + rename
* chore(robots): remove left arm references
* refactor(teleop): multiple improvements to leader
* refactor(teleop): multiple improvements to leader
* feat(robots): add open arm to util CLI
* chore(robot): add alias openarm
* Apply suggestions from code review
Co-authored-by: Pepijn <138571049+pkooij@users.noreply.github.com>
Signed-off-by: Steven Palma <imstevenpmwork@ieee.org>
* chore(motors): remove normalization tables damiao
* fix(motors): imports and signatures
* feat(motors): add motor_type_str + recv_id to motor class and _get_motor_recv_id raises if no motor_obj.recv_id
* chore(motors): remove normalize from base motor class and damaio
* tests(motors): remove bad tests (to be replaced)
* chore(motors): updated import check
* fix(robots): open arm mirrored config for joint limits
* chore(motors): update position_kd gain values
* chore(robots): set to 0 if openarm is calibrated at connect time
* chore(robots): remove macos in open arm as can doesn't support it
* chore(robots): update for motor_type_str in Motor class
* chore(robots): no default value for can port in open arms
* feat(robots): add bi manual openarm follower and leader
* use constant for kp and kd range and check responses in mit_control_batch()
* Add docs on setting up canbus and use damiao otor bus, also add lerobot_setup_can.py and log if there is not response from a write command
* precommit format
* supress bandit as these are intentional cli commands
* fix setup-can
* add test
* skip test in ci
* nit precommit
* update doc example
* dont import can for tests
* remove comment
* Add openarms docs
* format
* update purchase link
* can to none if nit availabl;e
* add canfd option in bus
* make handshake logic similar to lerobot-can
* type hint
* type check
* add temp teleop test
* remove script
* mock class
* mock class
* ignore linter
* pre-commit
* Add command for bimanual openarm
* fix import
* fix import leader
* fix import draccus
---------
Signed-off-by: Steven Palma <imstevenpmwork@ieee.org>
Co-authored-by: Pepijn <pepijn@huggingface.co>
Co-authored-by: Pepijn <138571049+pkooij@users.noreply.github.com>
* fix(motors): cleanup imports + fix signatures
* feat(motors): add damiao canbus + multiple fixes
* fix(motors): address comments -> last_state + different gains + sleep
* refactor(motors): reduce duplicated code + adressed some comments in the PR
* chore(motors): better timeouts
* tests(motors): damiao test and imports
* chore(deps): fix space
* feat(robot): add openarm leader
Co-authored-by: Pepijn <pepijn@huggingface.co>
* feat(robot): add openarm follower
Co-authored-by: Pepijn <pepijn@huggingface.co>
* refactor(robot): remove mechanical compensations and double arm assumption + rename
* chore(robots): remove left arm references
* refactor(teleop): multiple improvements to leader
* refactor(teleop): multiple improvements to leader
* feat(robots): add open arm to util CLI
* chore(robot): add alias openarm
* Apply suggestions from code review
Co-authored-by: Pepijn <138571049+pkooij@users.noreply.github.com>
Signed-off-by: Steven Palma <imstevenpmwork@ieee.org>
* chore(motors): remove normalization tables damiao
* fix(motors): imports and signatures
* feat(motors): add motor_type_str + recv_id to motor class and _get_motor_recv_id raises if no motor_obj.recv_id
* chore(motors): remove normalize from base motor class and damaio
* tests(motors): remove bad tests (to be replaced)
* chore(motors): updated import check
* fix(robots): open arm mirrored config for joint limits
* chore(motors): update position_kd gain values
* chore(robots): set to 0 if openarm is calibrated at connect time
* chore(robots): remove macos in open arm as can doesn't support it
* chore(robots): update for motor_type_str in Motor class
* chore(robots): no default value for can port in open arms
* use constant for kp and kd range and check responses in mit_control_batch()
* Add docs on setting up canbus and use damiao otor bus, also add lerobot_setup_can.py and log if there is not response from a write command
* precommit format
* supress bandit as these are intentional cli commands
* fix setup-can
* add test
* skip test in ci
* nit precommit
* update doc example
* dont import can for tests
* remove comment
* Add openarms docs
* format
* update purchase link
* can to none if nit availabl;e
* add canfd option in bus
* make handshake logic similar to lerobot-can
* type hint
* type check
* add temp teleop test
* remove script
* mock class
* ignore linter
---------
Signed-off-by: Steven Palma <imstevenpmwork@ieee.org>
Co-authored-by: Pepijn <pepijn@huggingface.co>
Co-authored-by: Pepijn <138571049+pkooij@users.noreply.github.com>
* feat(robots): consolidates bi SO setups
* fix(robots): solve circular dependecy
* fix(robots): teleop & record working
* feat(robots): only one SO
* fix(utils): rename bi so
* fix(scripts): bi so import
* fix(rl): remove imports
* upload
* feat(omx): simplify motor initialization and remove default calibration files
* feat(omx): read motor positions without normalization for improved accuracy
* update calibration method for return factory value
Signed-off-by: Junha Cha <ckwnsgk1@gachon.ac.kr>
* change the drive mode
* refactor: clean up code by removing unnecessary blank lines in omx_follower and omx_leader modules
* feat(omx): update calibration method to set drive modes for motors
* feat(pyproject): add 'ROBOTIS' to extend-ignore-identifiers-re list
* feat(omx): enhance calibration method to write default drive modes to motors
* Update src/lerobot/robots/omx_follower/__init__.py
Add informations about the robot
Co-authored-by: Steven Palma <imstevenpmwork@ieee.org>
Signed-off-by: Woojin Wie <dnldnwls1123@gmail.com>
---------
Signed-off-by: Junha Cha <ckwnsgk1@gachon.ac.kr>
Signed-off-by: Woojin Wie <dnldnwls1123@gmail.com>
Co-authored-by: Junha02 <chajunha2023@naver.com>
Co-authored-by: Junha Cha <ckwnsgk1@gachon.ac.kr>
Co-authored-by: Steven Palma <imstevenpmwork@ieee.org>
* feat: Register external policies
* ruff fix
* move policy util functions to policy factory
* refactor register_third_party_devices -> register_third_party_plugins
* feat: Update docs with bring your own policies
* Improve docs for new policies
* fix: Inconsistent quotation marks
* fix: Remove print statement
* fix: wrong base class name in documentation
* fix: Handle better how the models are parsed
* fix: precommit passing
* Update docs/source/bring_your_own_policies.mdx
Co-authored-by: Steven Palma <imstevenpmwork@ieee.org>
Signed-off-by: Daniel San José Pro <42489409+danielsanjosepro@users.noreply.github.com>
---------
Signed-off-by: Steven Palma <imstevenpmwork@ieee.org>
Signed-off-by: Daniel San José Pro <42489409+danielsanjosepro@users.noreply.github.com>
Co-authored-by: Steven Palma <imstevenpmwork@ieee.org>
* feat(devices): add lazy loading for 3rd party robots cameras and teleoperators
Co-authored-by: Darko Lukić <lukicdarkoo@gmail.com>
* feat(devices): load device class based on assumptions in naming
* docs(devices): instructions for using 3rd party devices
* docs: address review feedback
* chore(docs): add example for 3rd party devices
---------
Co-authored-by: Darko Lukić <lukicdarkoo@gmail.com>
